Thermo Scientific Dionex AutoTrace 280 Solid-Phase Extraction Instrument
The Thermo Scientific™ Dionex™ AutoTrace™ 280 Solid-Phase Extraction instrument handles large volume Solid-Phase Extraction (SPE) of liquid samples from 20 mL to 4 liters. The instrument can be configured with 1, 3, or 6 mL SPE cartridges or 47 mm solid-phase disks. The instrument automatically loads liquid samples on the SPE material then automatically extracts the analytes of interests using up to five different solvents.
| Gas Regulator and Gas Gauge Range | Output: 0–30 psi (0–1.4 bars), Input: 100 psi (6.9 bars) maximum |
| Net Weight | 150 lbs. (68.1 kg) |
| Dimensions (h × w × d) | 23 × 25 × 27 in (57 × 63.5 × 69 cm) Sample Rack: 8 × 16.5 × 13 in) |
| 500 & 600 Series EPA Methods | 24 methods stored in the Dionex AutoTrace 280 SPE instrument |
| Electrical | Voltage: 100, 120, 220, or 240 V ± 10% Frequency: 47–63 Hz Power: 150 Volt AC |
| Liquid Management | Air Syringe: One 10 mL air syringe LH Syringe: One 10 mL liquid handling syringe 12-port Valve: Rotary, sliding Rulon® seal Valves: 3-way, Teflon® Nozzles: Stainless steel Tubing: TFE, 1/16” ID, (6 total supplied) |
| Sample Pumps | Displacement: Positive Accuracy: ± 2.5% Tube Fitting: Kynar® Piston and Liner: Ceramic Non Use: Not for use with acetic acid and acetone |
| Solid Phase Extraction Configurations | 1 mL Syringe: Compatible cartridge 3 mL Syringe: Compatible cartridge 6 mL Syringe: Compatible cartridge 47 mm SPE disk |